Tag: system

Playing with old Computers!

These past two weeks since I last posted I’ve been showing some old computers the “free” way!
I sent Windows 98SE to the recycle bin, and installed Linux! Or more specifically I first installed Puppy Linux, and then Zenwalk Linux

I got Puppy running on one, but the x windows system wouldn’t start up, so I switched to a second computer, and got it installed and running! The wireless network worked straight out of the box, except that it I had to unhide the network SSID for it to connect!
I ditched Puppy because I just couldn’t get the wireless started on boot-up!

So I went with Zenwalk Linux. It installed without a hitch, the desktop runs a little slow but I’m going to see if I can get another one installed instead.
But wireless didn’t work, so I had no connection to the internet, and the kernel module for the wireless card wasn’t installed by default. I managed to get the files needed onto the computer, but it stopped compiling with an error.
Luckily the NDIS wrapper program was installed so I could use the Windows driver provided with the network card on Linux.
I downloaded the install program from the Belkin website
~ $ cd Download/f5d7000v3_2.2.7.0
f5d7000v3_2.2.7.0 $ ls -l
total 23796
-rw-rw-r-- 1 anthony anthony 24333824 2008-06-01 20:26 f5d7000v3_2.2.7.0.exe
f5d7000v3_2.2.7.0 $ unzip -a f5d7000v3_2.2.7.0.exe
Archive: f5d7000v3_2.2.7.0.exe
inflating: start.exe [binary]
inflating: files/._setup.exe [binary]
inflating: files/rt2500.cat [binary]
inflating: files/Rt2500.inf [text]
inflating: files/Rt2500.sys [binary]
inflating: files/Rt25009x.sys [binary]
inflating: files/setup.exe [binary]
inflating: manual/._manual.pdf [binary]
inflating: manual/manual.pdf [binary]
inflating: other/.DS_Store [binary]
inflating: other/._.DS_Store [binary]
inflating: other/._ar500enu.exe [binary]
inflating: other/._flashmain.swf [binary]
inflating: other/._icon.ico [binary]
inflating: other/ar500enu.exe [binary]
inflating: other/flashmain.swf [binary]
inflating: other/icon.ico [binary]
inflating: AUTORUN.INF [text]
f5d7000v3_2.2.7.0 $ ls -l
total 27104
-rw-rw-r-- 1 anthony anthony 45 2004-10-25 18:45 AUTORUN.INF
-rw-rw-r-- 1 anthony anthony 24333824 2008-06-01 20:26 f5d7000v3_2.2.7.0.exe
drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 files
drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 manual
drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 other
-rw-rw-r-- 1 anthony anthony 3343706 2004-08-24 10:41 start.exe
f5d7000v3_2.2.7.0 $
And it worked! I got it connected and onto the internet in no time at all, and the best bit, it connects to the network while its booting up!

I haven’t decided yet, but I might either go back to Puppy, or install a different distro, maybe DSL or Vector Linux

New Computer Built

If anyone has been keeping an eye on my Flickr account, you may have noticed pictures of my new computer being built have appeared!
They are the best of the ones I took, and unfortunately don’t show every step I took in building the computer.

I started the build on the fourth of March (Tuesday) by fitting the power supply, motherboard, cpu, memory and DVD drive inside the case.
Then on the eighth (Saturday) I fitted the two hard drives, and connected all the cables!

The build went quite well, I brought a few extra bits that I didn’t actually need, but at the time thought I did need! Lol!

I found a few limitations with the case during the build, one of them being the extra hard drive bay in the bottom of the case right behind the power supply, I feel it was a little cramped, and that there was barely any room for the cables coming out of the back of the power supply!

There is practically no cable management built into the case!

And finally the external drive bays, only one side of the case can be opened, which means that only one side of any drive fitted is attached, but there is some support provided to hold the drive up.

There is also the problem of the blanking plates on the front. I found I could not remove the plastic blanking plate from the outside of the case, and I couldn’t push it out from the inside because of a metal plate that had to be broken off first.
Having the metal plate there may help with the cooling, or keeping the system quiet, but maybe there should be some easier way to remove it?

That’s all I have time for in this post, but I’ll post more details when I get another chance!

Till then,
Happy computing!